The buildings

The use of agrofibre, specialized non-woven material is a relatively new trend in agricultural technology, it is not more than 15-20 years. But already in a short time, it has earned popularity among farmers and lovers of work in small individual plots. This material allows to achieve high and early harvests and, at the same time, considerably simplifies the most labor-intensive processes of work of the gardener.

Site owners prefer to grow vegetables, rather than buying them in the store. Determining at first glance whether a product on a table is harmful or useful is difficult. Therefore, providing themselves with healthy and tasty food is within the reach of every summer resident. A great helper is the greenhouse. It helps to increase yields.

Watering the soil - the most important link in the care of greenhouse plants. In the case of the temporary impossibility of regular manual irrigation of the earth, the laws of physics and improvised means come to the rescue. Moistening the soil using a dead plastic bottle is an ideal alternative to watering in the usual way.

Regardless of how the plant is grown, it needs three things to do. It is warm, light and moisture. If the seedling grows outside the greenhouse, then rain can easily cope with the irrigation, or manual irrigation can be practiced. But to water the bush in the greenhouse is much more difficult. Moreover, it is not easy to accurately measure the necessary doses of water.

Drop irrigation is a system that has been widely used in many countries. In the middle lane, it is widely used in greenhouses. A drip plant saves water, prevents soil erosion, reduces labor costs for irrigation. How to make drip watering with their own hands in the greenhouse?

What is not “automatic” is “manual.” Opening the doors of the greenhouse, we ourselves - and the temperature sensor (or the analyzer - if there is a thermometer), and the drive ... The gardener is the most sensitive and reliable "mechanism". "Cons" - non-stationarity, the desire to work in multitasking mode, combined with a limited number of hands.

The timely airing of the greenhouse is one of the necessary conditions for the healthy growth of plants. And for this it is necessary to periodically open and close the vents, thus controlling the indoor climate. But not all land owners are able to consistently carry out this procedure.

During the operation of the greenhouse, one of the most important tasks is to maintain the optimum temperature at the natural humidity level. It is easiest to solve the problem by airing the room. However, manually doing this is often problematic due to lack of time. Therefore, it makes sense to arrange automatic regulation of the position of the valves using a thermal actuator.

Summer in the Russian regions can not be called long. During the hot period in most areas for swimming are widely used natural water bodies: lakes, ponds, rivers. But what about those who live far from the river? Of course, the most rational way out in this case will be the installation of an artificial pool from the materials we are used to in the usual summer cottage.

Increasingly popular among gardeners and avid gardeners are polycarbonate greenhouses becoming the foundation for greenhouses of this type can be made independently, and the choice of material and method is quite wide. In this article we will take a closer look at whether a foundation for a greenhouse made of polycarbonate is needed, from which it is best to make it, considering the functions of the greenhouse.

Many people have special, large or small greenhouses on their personal plots, which are intended for growing seedlings of vegetables, berries, a wide variety of greenery used in cooking, and even flowers. However, not every owner of such a structure knows how important it is to maintain the air temperature inside the greenhouse that is most suitable for the rapid growth of plants.

The Dutch greenhouse construction technology is widely known all over the world today. The use of these structures allows you to grow abundant crops at minimal cost. Through the use of technologies of "closed cultivation" significantly reduces the number of pesticides and fungicides, which ensures the cultivation of environmentally friendly products.

Spring comes, and with it the annual hassle associated with garden work. The greenhouse requires special attention: the frame needs to be repaired, the soil must be disinfected and renewed. Gardeners know what excellent results a well-groomed greenhouse gives, so they don’t spare time or money for its preparation.

Arched greenhouses made of polycarbonate have become widely popular with domestic farmers not so long ago. A total of a dozen or two decades ago, such constructions were rarely met, whereas today they are actively used not only in homestead territories, but also in the agricultural industry.

Greenhouses from a bar are very widespread among summer residents and gardeners now. There is a wide selection of ready-made greenhouses on the market, which you only need to collect on your own piece of land. However, their cost is not the smallest. Therefore, many resort to self-build greenhouses. You can do it yourself using the available materials.

To take advantage of all the advantages of the greenhouse on the garden plot, even at the design stage, it makes sense to pay particular attention to the choice of materials for the frame and walls. The durability of the greenhouse will depend on the strength of the frame, and the well-being of the plants will depend on the properties of the covering material. The best combination of these requirements is demonstrated by a pair of “shaped tube / cellular polycarbonate”.

With the onset of the planting season, each gardener seeks to prepare as best as possible for the beginning of the planting of vegetable crops. At the same time, sincere adherents of dacha farming try to grow their own seedlings on their own plot. For this, it is not at all necessary to build a greenhouse of large sizes, but it is quite possible to get along with the construction of a mini-greenhouse made of polycarbonate.

Who would have thought ten years ago that we will be able to influence the growth and fruiting of garden and garden crops with the help of the color scheme of greenhouse coverings ?! In addition to the usual care, the correctly chosen color of polycarbonate will help to grow strong plants and create the necessary conditions for obtaining a high yield.

Polycarbonate greenhouses are becoming increasingly popular. Every gardener should be aware that only proper installation is not enough for long and trouble-free operation, as well as which polycarbonate is better to use for greenhouses. It is important and in time to carry out repairs of the structure, thereby extending its service life and avoiding serious or irreparable damage.

The arrangement of the greenhouse on the plot greatly prolongs the season of active gardener's work and allows you to shoot much greater yields. There are many options for creating such structures. However, most often there are designs of cellular polycarbonate mounted on galvanized metal profiles.